My panelview plus 600 uses Rockwell automation, I powered it one day to discover that the program has crashed, I tried loading other .MER files in the FTVME but it didn't resolved. Can someone with similar experience help me out. This is what is displayed on the panelview.check attachment.
This means the panel view can not connect to the PLC.
Did you click OK when the option {Replace the communication} came up. try to download the mer files again to the panel view.
Check in RSlinx if the path is properly assign to the the PLC
This means the panel view can not connect to the PLC.
Did you click OK when the option {Replace the communication} came up. try to download the mer files again to the panel view.
Check in RSlinx if the path is properly assign to the the PLC