Deer
Member
- Join Date
- Jun 2002
- Posts
- 124
Hi All,
I have Panelview 900 (2711-T9A1),I have make some modification program on this Panelview using the panelbuilder software.
After that, I was download this program to the Panelview900, and I recycle power.When this panelview count some numbers,this PV stop count on 24, and give a " ERROR! FEHLER! ERREUR! ERRORE!" message.
I know, 24 is about firmware problem/corrupted.
To solve this problem, I have try to download or upgrade the firmware to the panelview, and the problem was solved.
My question, what caused so firmware can corrupt on the panelview ?
Many thanks
Deer
I have Panelview 900 (2711-T9A1),I have make some modification program on this Panelview using the panelbuilder software.
After that, I was download this program to the Panelview900, and I recycle power.When this panelview count some numbers,this PV stop count on 24, and give a " ERROR! FEHLER! ERREUR! ERRORE!" message.
I know, 24 is about firmware problem/corrupted.
To solve this problem, I have try to download or upgrade the firmware to the panelview, and the problem was solved.
My question, what caused so firmware can corrupt on the panelview ?
Many thanks
Deer