Hi guys,
Thought I might ask here if anyone knows, currently have tech support looking for a solution.
I have a micro820 and wanting to extract the time components from the time format data type. So basically if I have t#hh:mm:ss:ms etc I would like to store hh or mm into different variables to be used through out program for calculations and display back to scada/hmi or put them all into an array and read the hh or mm from the array. Im basically making a countdown timer to display onto hmi for setting irragation pump run times and display the time counting down to 0. There seems to be not much much information on the net for the micro800 range.
Cheers,
Matthew
Thought I might ask here if anyone knows, currently have tech support looking for a solution.
I have a micro820 and wanting to extract the time components from the time format data type. So basically if I have t#hh:mm:ss:ms etc I would like to store hh or mm into different variables to be used through out program for calculations and display back to scada/hmi or put them all into an array and read the hh or mm from the array. Im basically making a countdown timer to display onto hmi for setting irragation pump run times and display the time counting down to 0. There seems to be not much much information on the net for the micro800 range.
Cheers,
Matthew