Micro800s max MSG_MODBUS Serial and TCP messages per scan

JeffreyS

Member
J
Join Date
Apr 2016
Location
Tulsa
Posts
36
In the help under MSG_Modbus and MSG_Modbus2 for TCP in Connected Components Workbench there is the following.

A maximum of four message requests per channel can be processed in one scan

Has anyone experienced this limitation that could share their experience?

Thanks,
Jeff
 

Similar Topics

J
How to make Micro800s count down or track the first of the month
I would like to have my Micro820 send a modbus message every first of the month just to show the system is up, alive and running properly. I don't...
Replies
6
Views
2,000
JeffreyS
J
P
Help w/ Proficy Machine Edition - GE Versamax Controller (Student License)
Hi Everyone, I own a GE Versamax controller that I purchased for a class at Long Beach City College a couple of years ago. I lost the use of my...
Replies
11
Views
182
Steve Bailey
Steve Bailey
C
MARATHON SYMAX PM IPM Permanent Magnet Motor
I had trouble for a week trying to get a Marathon Symax Motor autotuned to work with a Powerflex 753 drive. I solved the problem and thought I...
Replies
0
Views
60
clyleadams
C
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
174
yawin
Y
K
Fault link blinking in GE Fanuc IC200PNS002-AC Versamax Network Interface Module
I have one GE Fanuc IC200PNS002-AC Versamax Network Interface Module and the fault red light is blinking and i have checked in manual it is...
Replies
9
Views
250
Steve Bailey
Steve Bailey
Back
Top Bottom