blueyedpeter
Lifetime Supporting Member
Hi there guys
I once again i need your help as you might be aware i have a long term project running .
I am trying to use both inputs 0 & 1 on the micrologix 1000 to read two different input pulses for two different speed values the resolution on both inputs are relatively low both are less than 500 pulses per minuet .
Now it was suggested that i use an up counter , a timer and totalize them both together.
Sounds great but how do i do that i have looked in the help section on instructions in slc500 . nothing came of it though .
Any i dear is better than what i have found so far thanks again peter
I once again i need your help as you might be aware i have a long term project running .
I am trying to use both inputs 0 & 1 on the micrologix 1000 to read two different input pulses for two different speed values the resolution on both inputs are relatively low both are less than 500 pulses per minuet .
Now it was suggested that i use an up counter , a timer and totalize them both together.
Sounds great but how do i do that i have looked in the help section on instructions in slc500 . nothing came of it though .
Any i dear is better than what i have found so far thanks again peter