So I've got a 1762-L40bwar Micrologix 1200 PLC. I'm looking to incorporate atleast 2 analog sensors into my project (conductivity and pH) and I am looking at the 1762-IF4 card to add this ability.
The sensors it would read would be from Omega. The following PDF shows the combo transmitter (for matching impedance to the PLC) for conductivity/pH http://www.omega.com/Green/pdf/CDTX300.pdf In Addition to the CDTX300 transmitter I would also buy the sensor probes (CDE-300 and PHE-7351-15).
I am fairly certain that this setup should work but I wanted to make sure before I go ahead and order these items, I'm just trying to ensure I won't be blindsided by a problem while working with them later.. so far nothing in the manuals is causing concern though.
Thanks!
The sensors it would read would be from Omega. The following PDF shows the combo transmitter (for matching impedance to the PLC) for conductivity/pH http://www.omega.com/Green/pdf/CDTX300.pdf In Addition to the CDTX300 transmitter I would also buy the sensor probes (CDE-300 and PHE-7351-15).
I am fairly certain that this setup should work but I wanted to make sure before I go ahead and order these items, I'm just trying to ensure I won't be blindsided by a problem while working with them later.. so far nothing in the manuals is causing concern though.
Thanks!