Archie
Member
Has anyone tried this cable from Automation Direct for programming the micrologix controllers:
http://web2.automationdirect.com/adc/Shopping/Catalog/Cables/Operator_Interface/Other_Panel_Cables/DP-ABCBL-2
I found an old discussion on this topic, but everything mentioned was about modifying a cable. It looks like this one will work as is.
http://web2.automationdirect.com/adc/Shopping/Catalog/Cables/Operator_Interface/Other_Panel_Cables/DP-ABCBL-2
I found an old discussion on this topic, but everything mentioned was about modifying a cable. It looks like this one will work as is.