Mitsubishi A9GT-RS4 Conversion

jthornton

Member
J
Join Date
Jul 2002
Location
Poplar Bluff, MO
Posts
295
I need to convert the program from a dieing A9GT-RS4 to a
GT2310-VTBA. I've sucked the old HMI program using GT Designer 2 Classic and have iQ Works Version 2. The salesman said something about the program needed to be converted and it's simple to do. He is out of pocket and I'm trying to help them get the thing up and running. So any suggestions will be a big help

Thanks
 

Similar Topics

E
How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Hi, How to get data from multiple Mitsubishi Q03UDVCPU into master PLC Q03UDVCPU through QJ71E71-100 ?
Replies
1
Views
62
parky
P
K
Mitsubishi F800 Control Via Ethernet IP
So the customer purchased a Mitsubishi drive, in the same project for a different pump they got an ABB drive, was literally whatever they could...
Replies
1
Views
79
kdean94
K
C
AOI to Mitsubishi FB?
hi all, I'm wondering if anyone has ever converted an Allen Bradley AOI to a Mitsubishi Function block. I's hard to find libraries from...
Replies
3
Views
183
parky
P
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
201
NicoSz
N
S
MITSUBISHI ALPHA AL2-24MR-D Controller
Hello! If someone can help me with the following problem. I can't change the phone number. Do I really need the interface (AL-232CAB - Programming...
Replies
0
Views
81
soro4gsm
S
Back
Top Bottom