dan325
Member
Using the E1070 with a FX3U Mitsubishi PLC in a machine tool application. We've used this HMI for several years with no problems. Now this:
Error code: FS_WRTR DATA ERR #4
The error occurred while running an automatic cycle with the machine, no human inputs. It has ran fine for 3 days, this is a new installation, so strange?? I had our customer cycle power on the machine and the error went away and seemed to function correctly.
Here is a link to the manual if that is any help:http://www.meau.com/Files/MA00776C.PDF
Help
Error code: FS_WRTR DATA ERR #4
The error occurred while running an automatic cycle with the machine, no human inputs. It has ran fine for 3 days, this is a new installation, so strange?? I had our customer cycle power on the machine and the error went away and seemed to function correctly.
Here is a link to the manual if that is any help:http://www.meau.com/Files/MA00776C.PDF
Help