isaacs james john
Member
Good day all
We've recently have a problem with this PLC not running after power up which controls our Incinerator. Found that the Off edit/run slide switch on memory card EEPROM-16 disintergrated and on PLC an error light Prog-E. System was powered off...Memory card removed and slide switch pins soldered in run position... re-inserted and again powered on but to no avail. Is this EEPROM faulty or is there any way of saving this memory card.. your assistance will be gratefull
We've recently have a problem with this PLC not running after power up which controls our Incinerator. Found that the Off edit/run slide switch on memory card EEPROM-16 disintergrated and on PLC an error light Prog-E. System was powered off...Memory card removed and slide switch pins soldered in run position... re-inserted and again powered on but to no avail. Is this EEPROM faulty or is there any way of saving this memory card.. your assistance will be gratefull