MITSUBISHI Melsecnet Problem

khalid rafiq

Member
K
Join Date
Sep 2006
Location
Faisalabad
Posts
24
We have three Mitsubishi A2N PLC connected through optical fiber cable. The Optical cable got damaged and we want to connect these PLC through some alternate medium as optical fiber cable is not available.
Any one have idea how it is possible.

Khalid
 

Similar Topics

MitsM83
Mitsubishi Q MELSECNET/H Transient Transfer Advice
Hello all, I have 7 Q series PLCs on a Melsec net/h network, Ladder Programming none of that fancy smancy ST stuff LOL :p. Were running the...
Replies
0
Views
1,417
MitsM83
MitsM83
pmcmahill
Mitsubishi Q PLC interface with MelSecNet 2
I have previously used a A1SJ71AP23Q card to bridge MelsecNet 2 to Q PLC. However, our local supplier told me that card is now obsolete. Has...
Replies
0
Views
1,229
pmcmahill
pmcmahill
D
Different between Mitsubishi Melsecnet/Mini and Melsecnet/Mini-S3
Hi, currently i have a Mitsubishi Melsecnet/Mini module installed in the A-Series PLC system. But this module no longer functional and I've bought...
Replies
0
Views
2,153
darren_hcf
D
C
AOI to Mitsubishi FB?
hi all, I'm wondering if anyone has ever converted an Allen Bradley AOI to a Mitsubishi Function block. I's hard to find libraries from...
Replies
0
Views
18
chizzler99
C
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
149
NicoSz
N
Back
Top Bottom