mm430 f003 problem

mehkocak

Member
M
Join Date
Jan 2005
Posts
58
hi

I get problem ( f0003 ) from siemens mm430 drive when an sudden electric drops.As I know, the kinetic buffering can be used to overcome this problem but when looking at the parameters ,I have seen only the parameters ( p1240-p1260 ) for Vdc max controller not for Vdc min or kinetic buffering.

tahnks for help.
 

Similar Topics

J
Chaining 23 Profibus MM430 Drives to CPU
I have a customer who wants a major upgrade to a system I installed in 2000. It will be mostly a start again job with new panels but reusing some...
2 3
Replies
33
Views
9,050
Manglemender
M
H
MM430 Commissioning with no load
Hi, I am trying to commission a set of MM430 drives using the function block example as found @...
Replies
11
Views
2,678
henno2000
H
D
TECHNICAL CHALLENGES WITH FIXING THE PLC RELATED PROBLEM IN A NIGERIA 25000 TON GRAIN SILOS STORAGE CONTROL PANEL
Hello, I am a plc engineer and I have a job to do in the NIGERIA 25000 TON GRAIN SILOS STORAGE CONTROL PANEL. A problem where the panel is not...
Replies
1
Views
116
JesperMP
JesperMP
M
Cimplicity Operator workstation problem
The project on the operator workstation keeps disconnecting, even though I have an installation server and operating station set up through...
Replies
0
Views
56
MHEDIREKIK
M
J
Problem with AVEVA InTouch Development License and Windows Server
I have a problem, I'm running an AE Licence Manager on a Windows 2016 Server, and my Window Maker is on another separate Windows 2016 Server. My...
Replies
0
Views
85
JWC213
J
Back
Top Bottom