Hi, I'm replacing a Moscad-L RTU with a ML1100. I've been given a spreadsheet with the modbus addresses I'll need to use for the various points reported to SCADA (WW). The addresses seem like numbers too high, and possibly with too many digits. Are possibly the first 3 digits (ie. 306, 406) not part of the actual data address?
There are multiple moscads, and all have the 306/406 digits, the 3, and 4 making me think input/holding registers. If that is the case, i'm still left with a 4 digit number starting with 6/06, and I don't know how create a register with a number that high. Thanks for your help, much appreciated. -Byron
here's a sample of these addresses:
306152:01
306152:02
306152:03
306152:04
306152:05
306152:06
406664
406664
There are multiple moscads, and all have the 306/406 digits, the 3, and 4 making me think input/holding registers. If that is the case, i'm still left with a 4 digit number starting with 6/06, and I don't know how create a register with a number that high. Thanks for your help, much appreciated. -Byron
here's a sample of these addresses:
306152:01
306152:02
306152:03
306152:04
306152:05
306152:06
406664
406664