semilogical
Member
When transferring information from an integer file in a SLC-1100 (or any SLC with modbus capability) is there any impact on the value in the modbus word? I'll give an example of what I'm sending:
I will be sending N7:0 to a modbus location through a CEV module. I'm currently unsure of the offset that will be used but if N7:0 goes to modbus address 401001 and N7:0/0 is 1 will the same bit be a 1 in 401001? (401001.1) I understand the LSB in AB land is 0 but in Modbus land it is 16.
Will my transferred value reside in 401001.1 or in 401001.16?
I will be sending N7:0 to a modbus location through a CEV module. I'm currently unsure of the offset that will be used but if N7:0 goes to modbus address 401001 and N7:0/0 is 1 will the same bit be a 1 in 401001? (401001.1) I understand the LSB in AB land is 0 but in Modbus land it is 16.
Will my transferred value reside in 401001.1 or in 401001.16?