modbus signal lights

secs

Member
Join Date
Aug 2015
Location
Office
Posts
65
Hi all.

I am looking for signal towers with TCP modbus ability. I would also like a sounder module if I can with multiple tones. 5 colors if I can plus the sounder module. I would accept a seperate light unit and sounder as I do have a need to put the sounders in areas where I dont have a need for the light towers

Peter
 

Similar Topics

I need a good idea to solve a small task. My customer bought a measuring device where the measurement is collected by a controller from a...
Replies
6
Views
3,254
Hello, I have a new meter that has been installed at my place of employment, which is reporting to a contrologix PLC. We initially hooked up the...
Replies
25
Views
7,266
Hello Everyone, I am using a raC_Opr_NetModbusTCPClient AOI module, as below,. So, I need some assistance to restrict in reducing the poling...
Replies
2
Views
96
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
69
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
10
Views
327
Back
Top Bottom