Aimin Ariff
Member
Hello brothers
Now I have problem in taking data, I use modscan32 to try to see values from modbus tcpip, for input registers, address 40002 until 40070, the problem is I cannot see data up to that address, it shows "modbus exception response from slave device".. But when I set to 64, it doesnt show that error and display data up until 40064, and I try again to change length to 66, which is 40066, and there u go, error again..
Same goes in my citect, before this okay when data up to 40060, now 40080 all turn #BAD.. please help me.. Thanks in advance
#freepalestine #humanity
Now I have problem in taking data, I use modscan32 to try to see values from modbus tcpip, for input registers, address 40002 until 40070, the problem is I cannot see data up to that address, it shows "modbus exception response from slave device".. But when I set to 64, it doesnt show that error and display data up until 40064, and I try again to change length to 66, which is 40066, and there u go, error again..
Same goes in my citect, before this okay when data up to 40060, now 40080 all turn #BAD.. please help me.. Thanks in advance
#freepalestine #humanity