Hello dear friends.Early this morning got to the plant and one of the machine would not start at all.I look at the PLC type Moeller PS4-341-MM1 and the red led was on in the state Not Ready.After some troubleshooting i got to the conclusion that the program is lost.I think the cause is due to the battery lost of contact on the plc pins.
Now i found an floppy disk containing the plc program(not sure is up to date),but i want to ask what program do i need and what cable?Anyone can help me with a link?Thank you.
Now i found an floppy disk containing the plc program(not sure is up to date),but i want to ask what program do i need and what cable?Anyone can help me with a link?Thank you.