Geoff White
Member
I have a L30ERM with 7 axes that is running in production now.
However I have a problem when it randomly does not start from power-up.
The motion group stays in a Not Syncronized status with no group faults but reports physicalaxisfaults.
None of the drives show faults and are all in the Waiting for Group state.
Disconnecting and re-connecting the ethernet from the PLC fixes the problem.
Can anyone shed any light on either preventing this problem from occurring or how to reset it in the program?
However I have a problem when it randomly does not start from power-up.
The motion group stays in a Not Syncronized status with no group faults but reports physicalaxisfaults.
None of the drives show faults and are all in the Waiting for Group state.
Disconnecting and re-connecting the ethernet from the PLC fixes the problem.
Can anyone shed any light on either preventing this problem from occurring or how to reset it in the program?