TConnolly
Lifetime Supporting Member
I'm just wondering why DLO is being used on #6 or #4 sized conductors. Those wires sizes are not especially large and its not hard to make tight bends with them.
Motor Circuit Sizing Question
- Thread starter Tim Ganz
- Start date
FactoryTalktotheHand
Member
Wow Tim you sure are a polarizing figure!
James Mcquade
Member
Tim,
My apologies.
I will answer in a more correct manner next time.
regards,
james
My apologies.
I will answer in a more correct manner next time.
regards,
james
jraef
Member
Similar Topics
Ignore - I asked this question already and found my answer.
Good afternoon,
Does anyone know if a circuit containing 3 Kinetix 5500 drives (& their motors) is considered a Motor Branch Circuit according to...
Hi,
I almost always use a fused disconnect for enclosures, usually class J and rely on the Bussman SPD publication to help with sizing the...
Can someone explain the differences? Do I still need to protect behind a contactor/overload combo?
Thank you!
Looking to add 4 motors to an existing cabinet that has a safety compactlogix plc with IO to spare. Boss wants to use the new Allen Bradley E300...