[email protected]
Member
I am trying to get a MSG to work between a Contrologix PLC re ethernet and a PLC 5 on DH+.
I've attached a pdf illustrating the connections.
I've tried a couple of different combinations CIP routings with no success. 1,2.192.168.1.2,3,21 was one attempt.
Maybe someone has some insight?
BTW the tree view within RXLogix5000 I've seen described in other threads does seem to be available to me.
I've attached a pdf illustrating the connections.
I've tried a couple of different combinations CIP routings with no success. 1,2.192.168.1.2,3,21 was one attempt.
Maybe someone has some insight?
BTW the tree view within RXLogix5000 I've seen described in other threads does seem to be available to me.