Helo everyone!
I am using micrologix 1100, for communicate through Ethernet IP whith 4 weighing modules,
3 of then are comunicate properly, however the 4th isnt.
I get information of it, but is very slow (40seg like), the other 3 are ok.
I try a lot of test but none have aswers me so far, so now i asking help for the PRO League .
Before you guys thing.
The module dosnt have problems, or the IP adress arent duplicate.
When I erase two weighing modules pair MSG, it work propely (like erase weighing modules 1 and 2 , weighing modules 4 works fine)
I think in begining is some memory duplicate problem, but isnt, I change it, I isolate it, and nothing works.
I let the routine to you guys see if someone can help me.
Weighing modules are full duplex.
I am not using MSG comum formula, but it works fine whith weighing modules 1,2,3 and f4 if I erase modules 1 and 2 MSG.
Below are 2 imagens of isolate part of program
https://imgur.com/a/ka0mIGi
https://imgur.com/z6FWO7U
I am using micrologix 1100, for communicate through Ethernet IP whith 4 weighing modules,
3 of then are comunicate properly, however the 4th isnt.
I get information of it, but is very slow (40seg like), the other 3 are ok.
I try a lot of test but none have aswers me so far, so now i asking help for the PRO League .
Before you guys thing.
The module dosnt have problems, or the IP adress arent duplicate.
When I erase two weighing modules pair MSG, it work propely (like erase weighing modules 1 and 2 , weighing modules 4 works fine)
I think in begining is some memory duplicate problem, but isnt, I change it, I isolate it, and nothing works.
I let the routine to you guys see if someone can help me.
Weighing modules are full duplex.
I am not using MSG comum formula, but it works fine whith weighing modules 1,2,3 and f4 if I erase modules 1 and 2 MSG.
Below are 2 imagens of isolate part of program
https://imgur.com/a/ka0mIGi
https://imgur.com/z6FWO7U
Last edited: