Hi, All...
I want to use the bits in an N7: register to set outputs.
Example... N7:0/10 equals 1, turn on O:0/1.
I am with RS500 and it isn't as easy as it sounds.
Every time I put N7:0/10 in an instruction, an error message pops up and says "Address must be specified to the word level!"
I really don't want to do LIM comparisons to 'extrapolate' what the N7:0/10 value must be.
I want to use the bits in an N7: register to set outputs.
Example... N7:0/10 equals 1, turn on O:0/1.
I am with RS500 and it isn't as easy as it sounds.
Every time I put N7:0/10 in an instruction, an error message pops up and says "Address must be specified to the word level!"
I really don't want to do LIM comparisons to 'extrapolate' what the N7:0/10 value must be.