ganutenator
Lifetime Supporting Member
The 14 gauge wires don't fit in the 1/4hp 208 atv320 drives with ferrels.
Panel shop said UL strictly forbids using 16 gauge.
why?
Panel shop said UL strictly forbids using 16 gauge.
why?
I don't know why UL does what it does but NFPA & NEMA dictate wire by Votage and Amperge carried.
Is the restriction only on the power wires or did they say you have to use 14 gauge for the wires from the speed pot and for the run and forward commands as well?
not until now. what are spade crimps if you don't mind my ignorance.Have you cosider using spade crimps instead of ferrules .
Paul