Need ControlNet eds file for sst profibus scanner

matt_o

Member
M
Join Date
Jul 2003
Posts
4
Just to clarify my query posted recently, we are trying to communicate to the SST-PFB-CLX profibus scanner over ControlNet and need a EDS file to configure it using "RSNetworks for ControlNet". I have been unable to download it from http//www.controlnet.org because the link to the eds page is broken. Do you have any suggestions?
(Daniel, the sst site does not provide the eds file I need)

Thanks a lot,
matt
 
Last edited:

Similar Topics

Joel201
Need help in Controlnet
Good day, Sorry for the simplicity of my question but anyways if anyone can tell me if i have a rockwell controlnet communication can i...
Replies
5
Views
1,518
Joel201
Joel201
ScottTheEngineer
Need to add a 1794-IB16 to controlnet
Hello, The Facts: 1. I need to add a 1794-IB16 to a controlnet 1794-ACN15 module. The module currently has only an analog input card 1794-OE4...
Replies
6
Views
3,836
ScottTheEngineer
ScottTheEngineer
A
need help
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Replies
1
Views
94
Ken Roach
Ken Roach
J
Need Ideas...
Decided to come to you all to see if any of you have any ideas on how to approach this issue. I have a 'pack' of product that drops. When that...
Replies
7
Views
306
OkiePC
OkiePC
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
148
TheCaptain2000
T
Back
Top Bottom