genius_clark
Member
Hi,
There is a 1756-L61 connect the FLEX I/O 1794-ACN15 by Controlnet coaxial cable.
The question is could I just replace the 1794-ACN15 to 1794-AENT , and connect the PLC and I/O with RJ45?
Could I use some wireless AP to connect them by radio?
Is the radio as good as Controlnet coaxial cable?
THX!
There is a 1756-L61 connect the FLEX I/O 1794-ACN15 by Controlnet coaxial cable.
The question is could I just replace the 1794-ACN15 to 1794-AENT , and connect the PLC and I/O with RJ45?
Could I use some wireless AP to connect them by radio?
Is the radio as good as Controlnet coaxial cable?
THX!