I'm new to the world of PLCs and I've been handed some legacy equipment and told to make it work. I've built a new workmaster from nothing and now have no idea how to use the LM6 software. I've tried contacting several distributors around Raleigh, NC but to no avail can not get a users manual. GE told me to contact my distributor. Does anyone have a PDF of this user manual?
Need LogicMaster 6 Software Manual
- Thread starter Simmons
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
Series Six manuals are not available online, but they are on the 'Legacy Products' CD, which your local distributor should have.
If they can't help you, contact me via Private Message through this site. I have the pdf files, but they are large (from 13 to 67 meg). I can email them if you have a broadband ISP, or I can burn a CD for you.
If they can't help you, contact me via Private Message through this site. I have the pdf files, but they are large (from 13 to 67 meg). I can email them if you have a broadband ISP, or I can burn a CD for you.
elevmike
Member
There are a few downloadable manuals here, but LogicMaster Manual is not one of them.
http://www.geindustrial.com/support/documents/GEK-25365A.pdf
http://www.geindustrial.com/support/documents/GEK-25365A.pdf
Similar Topics
I'm new to the world of PLCs and I've bought a machine with series six, but I need to do some alterations in the ladder diagram. But now have no...
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
I've got this 3-phase 575V motor that we're controlling with a VFD (Variable Frequency Drive), which has been quite the learning curve in itself...
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Hi all,
I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
