I am new to this game using the CSMSTRSX with crimson 3. I can not get the master to communicate to the CSPID1 modual. the termination jumper is in place on the end. I can communicate to the master by itself with USB and ethernet cable. I now have added the CSPID1 modual and the master STS led flashes 3 times and the CSPID1 alternates between the red and green. which both means no communication between the two. So what is the quik fix or point me in the right direction. I have looked over the manual for the hardware and software but not having much luck.
thanks
thanks