nexgenie 1000 plc
- Thread starter TECHUSER
- Start date
id10t_error
Lifetime Supporting Member
Similar Topics
Please send a programming cable configuration
I want to implement CAN protocol for remote I/O' and UOP(User Operating Panel).The remote I/O and UOP only communicates on CAN bus and they are...
Can someone help me to get the wiring diagram of Nexgenie 2000 PLC to PC Communication cable(9 pin mini Din Male to 9 pin D connector female)...
Nexgenie series of PLC'S
Micro PLC,Nexgenie 5000,Nexgenie 2000,Nexgenie 1000
Text HMI -Junior HMI,Junior ex HMI,Senior HMI,Senior EX hmi
Touch...
I have a RED LION CR1000-04000-00210 4.3"
When powered on it says”
INTERNAL BATTERY IS LOW
touch screen to continue
No problem, I can change...