NMEA0183 with PLC

oko

Member
O
Join Date
Aug 2009
Location
Skala
Posts
6
Hi - Is there anyone in here that has done some PLC programming for the NMEA0183 protocol? or has some cicode example for reading/controlling NMEA0183 with Vijeo Citect?
I have been asked to integrate a valve system that uses the protocol NEMA0183, in a Vijeo Citect project, which also includes a PLC.

Best Regards
Oliver
 
I had to interface with a GPS from a Beckhoff PLC once using NMEA0183. I don't have the project anymore, so I can't help you there but it was very simple as far as I remember.
 

Similar Topics

A
Gps nmea0183
Hi! i need to connect a mushrom GPS antenna nmea0183 to my wago PFC-200 is there someone who has some best practice methood to do this?do i need...
Replies
0
Views
1,104
armada
A
R
Free and open-source PLC driven warehouse/manufacturing simulation
GitHub Link: Open Industry Project This is a side project I've been working on for some time. The goal is to provide an open platform for...
Replies
0
Views
86
ryevdokimov
R
Z
Integrate between Flowmeter Promass 300 EH with AB PLC.
Dear All, Currently i'm working with Endress Hauser flowmeter and AB PLC and try to integrate with 2 items. Flow meter spec using is Promass...
Replies
5
Views
104
cardosocea
C
S
Multiple Panel View 7 on one A-B PLC.
Can I connect two A-B Panel View 7 to a A-B PLC. Same graphics etc. One on the local control panel and the other Panel View 7 in a remote control...
Replies
2
Views
52
James Mcquade
J
X
Detection of HMI Status in the PLC ?
Hello, I'm working with Studio 5000 and ME Station, and I'm trying to find a way to detect if the PC with the HMI is shut down or not. I've tried...
Replies
5
Views
140
Ken Roach
Ken Roach
Back
Top Bottom