1. Shutdown the computer.
2. Remove the 'dongle' (hardware key).
3. Start computer.
Now with the dongle out, you may be given a choice when iFix starts to go into Development mode. If not, when vieiwing a screen, press CTRL-W to take you into Draw / Development mode.
Notes: Shutdown and removing the dongle is needed as it's read upon boot. If it's a Runtime only key, you MUST re-boot without it. If you have a Runtime/Development key you do not need to re-boot without it.
Development mode without a dongle lasts for only 2 hours and iFix networking to View nodes is disabled.