RockyLeafs
Member
We have a customer with a very old piece of equipment (circa 1999).
That has a OP7 Siemens HMI unit. Their current unit has gone down, and are hoping for a replacement.
We have managed to source a refurbished unit, and I have some some files from our servers for the project (.PDB, which we believe might be the file for the HMI).
We typically never deal with Siemens hardware, and never anything this old. This machine was made by our company after we had took ownership.
We've tried to find a contract programmer to be able to connect and download a program to the OP7 unit, but every contractor has stated they are too busy or has not gotten back to us.
Does anyone have any input or solution for us? Again, we're no familiar with Siemens software, so we aren't sure if we even have the ability to transfer to this unit.
That has a OP7 Siemens HMI unit. Their current unit has gone down, and are hoping for a replacement.
We have managed to source a refurbished unit, and I have some some files from our servers for the project (.PDB, which we believe might be the file for the HMI).
We typically never deal with Siemens hardware, and never anything this old. This machine was made by our company after we had took ownership.
We've tried to find a contract programmer to be able to connect and download a program to the OP7 unit, but every contractor has stated they are too busy or has not gotten back to us.
Does anyone have any input or solution for us? Again, we're no familiar with Siemens software, so we aren't sure if we even have the ability to transfer to this unit.