Omron #3G2C7-LK201-EV1, Host Link Unit

Mine says run/program and I leave it in Program...It does not fault or stop my processors. But this Omron stuff is old so make sure you are not in a critical situation when you plug it in...just to be on the safe sid.
 

Similar Topics

go to download 3G2C7-LK201 and RS232 comms with LSS (and SCADA) please you selection a link, after you waiting 5 seconds next skip ads, go to...
Replies
0
Views
1,280
Hello, I have an ooooold Omron C40K-CDR-A plc that I have to use a handheld unit to program. It's tiny and difficult to use so after doing a bit...
Replies
13
Views
3,854
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
Replies
3
Views
135
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
86
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
216
Back
Top Bottom