Omron and Hitech electronics

[Estring]

Hi Experts,

I'm facing with a problem in next configuration system,
SYSMAC OMRON C200H CPU01 PLC with LK201-V1 communication module and Hitech Electronic HMI panel(very old), the problem it's not communicating i cant find out where is the problem either the HMI communication port not working or communication module on PLC.

How could i connect to the PLC and make any diagnostics about the communication, which software should i use for this type of CPU? and which cable? I've never worked worked with OMRON PLC.

Thanks in advace,

Best Regards
Greg Estrin,
http://www.estrin.co.il/#!home/mainPage

 

[goghie]

Try Omron Multiway.

 

[jrwb4gbm]

A lot of info, also some disks with software at bottom right side of webpage.
http://www.mikroe.com/old/books/plcbook/plcbook.htm

 

[Estring]

Thanks to all,

i've been told also that i can use CX-one to connect and upload the program from the PLC.