James Mcquade
Member
Hi everyone,
i have multiple Omron hmi terminals in the plant and i need to upload each program. i have an ns8-tv01b-v2 terminal in the office to play with that is set up as a spare for one of our lines.
i have the cx designer software and can successfully transfer the program from the hmi to my pc using the usb cable.
i'm having trouble transferring the program using the ethernet cable. i have searched the internet and youtube videos with no luck.
i select the Pt icon and then select transfer, transfer from pt. i select ethernet and then the settings button. this is where i get lost. I am attaching the network page. the drivers section says the node is 253. the ip address is 255.255.255.255. port 9600. Also, how would i download using the ethernet cable
my hmi address is 192.168.1.23, node 23. my pc address is 192.168.1.253, subnet 255.255.255.0
Any help would be much appreciated.
thanks,
james
i have multiple Omron hmi terminals in the plant and i need to upload each program. i have an ns8-tv01b-v2 terminal in the office to play with that is set up as a spare for one of our lines.
i have the cx designer software and can successfully transfer the program from the hmi to my pc using the usb cable.
i'm having trouble transferring the program using the ethernet cable. i have searched the internet and youtube videos with no luck.
i select the Pt icon and then select transfer, transfer from pt. i select ethernet and then the settings button. this is where i get lost. I am attaching the network page. the drivers section says the node is 253. the ip address is 255.255.255.255. port 9600. Also, how would i download using the ethernet cable
my hmi address is 192.168.1.23, node 23. my pc address is 192.168.1.253, subnet 255.255.255.0
Any help would be much appreciated.
thanks,
james
Last edited: