mrsenolsezer
Member
- Join Date
- Dec 2004
- Posts
- 49
I had a problem with one of our spring machines that has 6 servo drives and motors. 1. drive(SGDH-10DE-OY) was giving an alarm RB1 or A81 i can't be sure because of 7-segment display.
So i've gone to Omron's web site and downloaded its document's "technical guide" i've checked the alarms but couldn't find the same alarm.
I tried something on the other same coded drives and found that if if disconnect the encoder cable from drive when it is only energised (seens like bb mode) drive firstly gives RC9 alarm or AC9 if i close machine connect encoder cable and open machine
it starts to give R81 alarm and i can't reset the alarm so now three of my drives give the same alarm and i can't reset them.
Now we know how the problem happened and doesn't know how to solve it please help me..
Best Regards.
So i've gone to Omron's web site and downloaded its document's "technical guide" i've checked the alarms but couldn't find the same alarm.
I tried something on the other same coded drives and found that if if disconnect the encoder cable from drive when it is only energised (seens like bb mode) drive firstly gives RC9 alarm or AC9 if i close machine connect encoder cable and open machine
it starts to give R81 alarm and i can't reset the alarm so now three of my drives give the same alarm and i can't reset them.
Now we know how the problem happened and doesn't know how to solve it please help me..
Best Regards.