Omron FZ4-L355 Vision & Profinet

Mike_RH

Lifetime Supporting Member
M
Join Date
Sep 2006
Location
Toronto
Posts
896
Gents,

Does anyone have any experience with this Omron vision system and a Siemens S7-300 CPU using Profinet?

The Omron does not support Profinet, but does support UDP / TCP connections. Has anyone doen this? Or would it be easier to use something like an Anybus adapter?

All comments appreciated!
 

Similar Topics

F
OMRON NJ301 PLC Fatal Error
Hi there , when I trying to do some communication things with PLC , I think I made a mistake and now PLC has fatal error. Only error light turn on...
Replies
0
Views
12
furkzn
F
S
Omron PLC CP1E (CP1W-CIF11) communicate with Oriental Motor ARD-CD controller using Modbus RTU
Hello, fellow PLC enthusiasts, I’m a newbie in PLC and am currently on a project that involves connecting an Omron CP1E (CP1W-CIF11) PLC to an...
Replies
2
Views
66
chelton
C
R
Omron device net fault
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
Replies
3
Views
159
Ricky Cuevas
R
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
87
IO_Rack
IO_Rack
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
216
BobB
BobB
Back
Top Bottom