Omron NT11

JMoga

Member
J
Join Date
Apr 2013
Location
Auburn, CA
Posts
4
I have an Omron NT11 HMI on a machine that needs replacing. This is my first time working with Omron.

I assume I will need some Omron software(NT-ZJCAT1-EV4)
to transfer the program onto the replacement NT11 and most likely a proprietary cable(XW2Z-S002)?
Can anyone tell me if this ios correct?

Thanks!
 

Similar Topics

C
Omron CP1L to NT11 Screen Help
Hello All I have an Omron CP1L Controller communicating with an Omron NT11 HMI screen. My Problem is the HMI seems to be only displaying values...
Replies
1
Views
3,546
lostcontrol
L
huynt
CJ1M CPU11 and NT11 of Omron
Dear all. We plant to use some NT11 programable terminals connect with one CJ1M PLC. I dont know number of NT11 can connect with one CJ1M use...
Replies
0
Views
5,537
huynt
huynt
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
68
IO_Rack
IO_Rack
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
201
BobB
BobB
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
78
IO_Rack
IO_Rack
Back
Top Bottom