omron plc &redlion
- Thread starter amit22
- Start date
BITS N BYTES
Lifetime Supporting Member
Try contacting RedLion, they should know! DUUUH
Red Lion Controls AP
India Sales Office
54, Vishvas Tenement, Near Railway Crossing
GST Road, New Ranip, Ahmedabad-382480
Gujarat, India
Phone: +91 98795 40503
Fax: +91 79 27531350
[email protected]
Red Lion Controls AP
India Sales Office
54, Vishvas Tenement, Near Railway Crossing
GST Road, New Ranip, Ahmedabad-382480
Gujarat, India
Phone: +91 98795 40503
Fax: +91 79 27531350
[email protected]
ArikBY
Member
I did it this week.
Be aware that the adresse on the HMI different then what you know.RLC invente some thing new ,but it work fine.
Be aware that the adresse on the HMI different then what you know.RLC invente some thing new ,but it work fine.
DanYost
Member
Amit,
Arik is correct, the C-Series driver will work.
Arik,
Thank you for helping Sam getting the customer working.
Regards,
Dan
Arik is correct, the C-Series driver will work.
Arik,
Thank you for helping Sam getting the customer working.
Regards,
Dan
ArikBY
Member
Dan
You Welcome
You Welcome
Similar Topics
Here's my scenario:
Using a standalone NX-SL3300 with a NX-EIC ethernet IP adapter. I figured I could potentially use the Ethernet/IP Slave...
I want to connect an EZMarquee (EZMR-2L20C) to an OMRON PLC: CQM1H-CPU21 and also a G306A Red Lion HMI. This PLC has just one built-in RS-232C...
Hi There,
I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
I am working on a project using a NB screen and NX1P2 PLC.
I am having a really hard time getting a real number to properly translate through to...
Our plant manger/my boss wants each line to display the takt time above the line. I am trying to research the cheapest way to do this. Our plant...