Omron pls - cqm1h cpu21

ali.niknezhadi

Member
A
Join Date
Nov 2007
Location
Isfahan
Posts
2
i want to read the memory information of a device with an omron plc CQM1H-CPU21 . this device is using Modbus protocol and it's memory addresses is like "74H3" . please give me some examples of how can i write a program to read it's memory continuously.

thanks
 

Similar Topics

R
Omron device net fault
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
Replies
0
Views
29
Ricky Cuevas
R
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
70
IO_Rack
IO_Rack
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
206
BobB
BobB
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
84
IO_Rack
IO_Rack
J
Omron CJ2m cpu33 - reading codes
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
3
Views
146
chelton
C
Back
Top Bottom