RioPLC
Member
I am using a HS-360X barcode scanner with versamax cpue05
I configured the scanner to match host settings and set software handshaking to None: Select this to transmit data immediately. The scanner expects no response from the host. hardware handshaking also set to none
I am trying to read a QR code that says P159
I attached a pic of my comreq below
Also have tried using 4403 (read string) and 16#0a as the terminating character, which works when I'm reading from my power supply.
I cannot get either method to work for the scanner. Any help is appreciated
I configured the scanner to match host settings and set software handshaking to None: Select this to transmit data immediately. The scanner expects no response from the host. hardware handshaking also set to none
I am trying to read a QR code that says P159
I attached a pic of my comreq below
Also have tried using 4403 (read string) and 16#0a as the terminating character, which works when I'm reading from my power supply.
I cannot get either method to work for the scanner. Any help is appreciated