Hello all;
I'm having trouble connecting an Omron NT2ST display to an AB Micrologix 1200 PLC. I am using a 1747-DPS1 Port Splitter to allow connection of both the HMI and Prog terminal to the PLC at the same time. The message I get continuously on the Screen is PLC communication error, check PLC Power. Whoactive shows no sign of the screen. I can communicate directly to the PLC through the port splitter with my PC , but that's about it. Can anyone lend any insights into this problem?
Thanks.
I'm having trouble connecting an Omron NT2ST display to an AB Micrologix 1200 PLC. I am using a 1747-DPS1 Port Splitter to allow connection of both the HMI and Prog terminal to the PLC at the same time. The message I get continuously on the Screen is PLC communication error, check PLC Power. Whoactive shows no sign of the screen. I can communicate directly to the PLC through the port splitter with my PC , but that's about it. Can anyone lend any insights into this problem?
Thanks.