ciama.marius
Member
Cqm1-cpu 21 soubroutine
Last edited:
Omron soubroutine
- Thread starter ciama.marius
- Start date
ciama.marius
Member
OP
Hello to all!
I have an machine with an plc CQM1-CPU 21
Last week i loss the backup battery ,and some data of the memory
I load the program but 4 soubroutine,don t work
Somebody can help me to solve this.All rest of the program work properly.
I think the problen its in the settings of call the soubroutines
In attach can find the progtam and the memory data
Thanks in advance
I have an machine with an plc CQM1-CPU 21
Last week i loss the backup battery ,and some data of the memory
I load the program but 4 soubroutine,don t work
Somebody can help me to solve this.All rest of the program work properly.
I think the problen its in the settings of call the soubroutines
In attach can find the progtam and the memory data
Thanks in advance
ciama.marius
Member
OP
Hello,Lancie!
the original program was receive from producer of the machine
Attach the program and data memory again
the original program was receive from producer of the machine
Attach the program and data memory again
ciama.marius
Member
OP
Similar Topics
CQM1-CPU 21 SOUBROUTINE problems
Y loss the backup battery ,i load the program and the memory data,but 4 soubroutine to end of the progtam don t...
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...