MarkNightingale
Lifetime Supporting Member + Moderator
Hi All,
I am totally new to Omron PLC's and have acquired a program.
I am using a CP1L Processor and would like to have a timer start when a selection is made.
I need the timer to go to a maximum of 1 hour, but from what I can see the timer will only go to 9999 seconds.
I have a value coming from the HMI of say 60 minutes. This value is being multiplied to convert it to seconds.
I have attached the program so you can see the whole picture.
Thanks
Mark
I am totally new to Omron PLC's and have acquired a program.
I am using a CP1L Processor and would like to have a timer start when a selection is made.
I need the timer to go to a maximum of 1 hour, but from what I can see the timer will only go to 9999 seconds.
I have a value coming from the HMI of say 60 minutes. This value is being multiplied to convert it to seconds.
I have attached the program so you can see the whole picture.
Thanks
Mark