OP7 displaying problem

[apetkov5]

Hello!

I have Simatic OP7 (DP) in project (connected to MPI), it works ok except one thing:

When reading actual data from data block (s7 314cpu) and trying to display it on OP there is problem.... i got ##### on display

data in data block is "real" (234.000000e+001 or similar)

Got any advice?

Thanx in advice!

 

[tim2]

That may be bacause the field isn't big enough to display the real number. Try making the field a little bigger in the HMI project