dmroeder
Lifetime Supporting Member
Anybody have any recommendations on an industrial infrared remote/receiver?
We have a piece of equipment that has basically 4 functions that are initiated by a fork lift driver (3 different cycles and a stop) and we would like to set it up so that he can operate it from a fork lift.
We were set on IR as opposed to RF because we want him to be next to be within sight of the machine while operating it.
Our control voltage is 24vdc.
Any help is greatly appreciated.
We have a piece of equipment that has basically 4 functions that are initiated by a fork lift driver (3 different cycles and a stop) and we would like to set it up so that he can operate it from a fork lift.
We were set on IR as opposed to RF because we want him to be next to be within sight of the machine while operating it.
Our control voltage is 24vdc.
Any help is greatly appreciated.