katratzi
Member
- Join Date
- Mar 2005
- Posts
- 210
If you increase the diameter of a pulley or sheave that is
belted to a motor by 80mm, how much should the belt length
be increased? An 80mm diameter increase causes the circumference
to expand by about 251mm, but is other information necessary
to determine the new belt length? This is a flat belt and a flat
pulley, not v-shaped. (I don't think this last makes a difference, but...)
belted to a motor by 80mm, how much should the belt length
be increased? An 80mm diameter increase causes the circumference
to expand by about 251mm, but is other information necessary
to determine the new belt length? This is a flat belt and a flat
pulley, not v-shaped. (I don't think this last makes a difference, but...)