Hello all
I’m working on coverting a application from PV Standard to Plus, when I open the .PBA file and click on any of objects that write/read data from PLC all I end up with is the “Tag Name” under tag edit, no “Node Name” “Tag Edit” info is available.
Also under “Tools” “Tag Count” yields no information. The PV is standard 600 touch/key and is communicating over DH+ with a 5/04.
All the previous applications I converted would have an address listed under “Tag Address”. Anyone ran issue of this sort in the past.
I’m working on coverting a application from PV Standard to Plus, when I open the .PBA file and click on any of objects that write/read data from PLC all I end up with is the “Tag Name” under tag edit, no “Node Name” “Tag Edit” info is available.
Also under “Tools” “Tag Count” yields no information. The PV is standard 600 touch/key and is communicating over DH+ with a 5/04.
All the previous applications I converted would have an address listed under “Tag Address”. Anyone ran issue of this sort in the past.
Last edited: