Need help with tag addressing from PV600 to Control Logix Processor.
I'm attempting to setup a Panel View 600 communicating via Ethernet to a Control Logix Processor.
I have put an numeric entry keypad enabled oject with the write & read tagname = ROLL_SIZE.
The tag address = ROLL_SIZE. (type=IEEE/real)
(I have a Program tag type real called ROLL_SIZE built in my RSLogix 5000 project)
When I validate the Panel Builder Project, I get the following :
Error(9436)- [Tag - ROLL_SIZE] Address is Invalid.
Can anyone help me with the addressing scheme required between the PV600 and Control Logix using its native/symbolic name.
Thanks
I'm attempting to setup a Panel View 600 communicating via Ethernet to a Control Logix Processor.
I have put an numeric entry keypad enabled oject with the write & read tagname = ROLL_SIZE.
The tag address = ROLL_SIZE. (type=IEEE/real)
(I have a Program tag type real called ROLL_SIZE built in my RSLogix 5000 project)
When I validate the Panel Builder Project, I get the following :
Error(9436)- [Tag - ROLL_SIZE] Address is Invalid.
Can anyone help me with the addressing scheme required between the PV600 and Control Logix using its native/symbolic name.
Thanks