Deer
Member
- Join Date
- Jun 2002
- Posts
- 124
Hi friends,
I meet a problem today in my customer where they use Panelview 1400E and I can't give them a solution to solve it.
Panelview was corrupted and need to upgrade the firmware.
The problem is, how to upgrade the firmware if Panelview can't display TERMINAL CONFIGURATION when key was changes to Configure mode?
The screen always display message either RUN or CONFIGURE key position.:"error #208 eeprom image is corrupt", APPLICATION LOADER FAILURE, FIRMWARE NOT FOUND"
As I knew, to upgrade panelview firmware you need to enter the Terminal Configuration and choose Upgrade Firmware (F12).
In this case I can't do that.
Somebody have idea?
Thanks in advanced
Deer
I meet a problem today in my customer where they use Panelview 1400E and I can't give them a solution to solve it.
Panelview was corrupted and need to upgrade the firmware.
The problem is, how to upgrade the firmware if Panelview can't display TERMINAL CONFIGURATION when key was changes to Configure mode?
The screen always display message either RUN or CONFIGURE key position.:"error #208 eeprom image is corrupt", APPLICATION LOADER FAILURE, FIRMWARE NOT FOUND"
As I knew, to upgrade panelview firmware you need to enter the Terminal Configuration and choose Upgrade Firmware (F12).
In this case I can't do that.
Somebody have idea?
Thanks in advanced
Deer