Struggling_forward
Member
I'm no longer struggling forward but have come to a stop.
I am trying to download a Panelbuilder32 application to a PanelView Plus 600.
I've uploaded and downloaded successful to a PanelView 600 (not Plus) today so I know my cable and Laptop are not the problem.
When I look at the Networks and coms setting is the terminal i have 3 choices
KEPserver Serial port. (this fails to launch so I'm guessing its not important)
Network connections.
RSlinx enterprise comms.
(I'm using RS linx Classic does that make a difference)
I've set the DF1 driver in Rslinx with the same settings in my laptop and terminal, and can see the Terminal as Node 1 but alas when I try to download U get the message,
Host has a problem and will not communicate.
I've tried DF1 point to point Internal Com1 but get the message
Target is not a operator terminal.
Any ideas?
I am trying to download a Panelbuilder32 application to a PanelView Plus 600.
I've uploaded and downloaded successful to a PanelView 600 (not Plus) today so I know my cable and Laptop are not the problem.
When I look at the Networks and coms setting is the terminal i have 3 choices
KEPserver Serial port. (this fails to launch so I'm guessing its not important)
Network connections.
RSlinx enterprise comms.
(I'm using RS linx Classic does that make a difference)
I've set the DF1 driver in Rslinx with the same settings in my laptop and terminal, and can see the Terminal as Node 1 but alas when I try to download U get the message,
Host has a problem and will not communicate.
I've tried DF1 point to point Internal Com1 but get the message
Target is not a operator terminal.
Any ideas?